Operational desk – Metal frame and wooden top

From 380,00€

Modern and minimalist desk design, produced in Italy and compliant with D.L. 81-08 (workplace safety). It is available in four sizes, three color variants for the top, and two color variants for the legs.

Colore Struttura

Dimensioni

Colore

Clear

Ask about this product

✓ Spedizione sempre gratuita

✓ Assistenza pre e post vendita

✓ Più modalità di pagamento

✓ Reso, garanzia e ricambi

Description
Additional information

Operational desk - Metal frame and wooden top

product features

Quality materials

1 The work surfaces are made of wood particle board panels
25 mm thick melamine-faced and edged with 2 mm ABS matching the surface color and available in: OAK, STONE GREY, and WHITE.

2 A 4 mm thick spacer made of ABS is applied between the work surfaces and the metal legs of the desks.

3 The metal base consists of: 2 bridge legs and 1 fixed longitudinal beam positioned at the center of the top. The legs are epoxy powder-coated in WHITE or SILVER at a fixed height and are made of metal tubing with a square section of 50x50x2 mm. The beam, painted WHITE or BLACK depending on the model, has a fixed length, is made of metal tubing with a rectangular section of 60x15x2 mm, and is equipped with holes for attachment to the top using metric screws. To allow leveling of the desks, leveling feet made of grey nylon with adjustable height are inserted at the lower ends of the legs.

All materials are certified and produced in Italy.

sizes to suit every need

Our operational desk with metal structure and wooden top is the perfect solution if you’re looking for a durable, high-quality work table suitable for intensive and continuous use.

The product, in all its color variations, is available in four different sizes:

120 x 80 x H 74 – Weight 34 kg
140 x 80 x H 74 – Weight 38 kg
160 x 80 x H 74 – Weight 41 kg
180 x 80 x H 74 – Weight 44 kg

Do not apply a load greater than 65 kg to the top

the color variants

Worktop finish

The work surface is made of 25 mm thick wood particle board panel, melamine-faced and edged with 2 mm ABS matching the surface color.

It is available in the colors: WHITE, STONE GREY, and WHITE.

White

Stone grey

Oak

Leg finish

The metal legs are epoxy powder-coated in the colors: WHITE and SILVER.

White

Silver

the combinations available

silver legs

Top finish: white / Leg finish: silver

Top finish: oak / Leg finish: silver

white legs

Top finish: white / Leg finish: white

Top finish: oak / Leg finish: white

Top finish: stone grey / Leg finish: white

Due to its uniform finish and size, the desk with metal legs can be coordinated with the drawer units in our range.

THE DESK HAS OBTAINED A CERTIFICATE OF COMPLIANCE WITH L.D. 81-08 (WORKPLACE SAFETY)

CARE AND MAINTENANCE:

For routine cleaning of these types of surfaces, it is advisable to use a soft cloth dampened with water.

For more thorough cleaning, a neutral, non-abrasive detergent can be used, possibly replaced by alcohol, diluted in water according to the proportion: 20% neutral detergent or alcohol, 80% water.

Immediately dry wet parts using only soft cloths.

For work surfaces, be careful to immediately remove ink, coffee, lemon stains, or any other substance that may be aggressive, to prevent them from penetrating deeply and damaging the surfaces.

It is recommended never to use abrasive products, or those containing chlorine, acetone, bleach, acidic detergents, as they are highly corrosive.

Avoid prolonged contact with water or sources of high humidity.

PACKING:

All components are supplied disassembled and packaged with a foldable triple cardboard wrapper, perimeter protection strips, and fillers where necessary. Corners are protected, where needed, with shock-resistant edge guards. The packaging is closed using adhesive tape and heat-sealed nylon strapping.

ASSEMBLY INSTRUCTIONS